1. Disconnect negative battery cable from jumper terminal. Raise and support vehicle. Remove right front wheel. Remove accessory drive belt splash shield from right wheelwell. 2. Remove accessory drive belts. Remove right engine support assembly vertical bolts from bottom side of frame rail (timing belt end of engine). 3. Lower vehicle. Place floor jack under vehicle to support weight of engine and transaxle assembly. Remove 3 bolts attaching engine support assembly to engine block bracket. 4. Move the A/C drier aside with hoses attached. Remove coolant reservoir tank. Remove right engine support assembly. Remove 3 bolts attaching engine support bracket to engine block, and remove bracket. 5. Remove crankshaft vibration damper. Remove power steering pump (hoses attached) and bracket from engine block. Remove timing belt covers. 6. Rotate crankshaft to align camshaft and crankshaft timing marks. See Fig. 11 and Fig. 12 .
- 1997 sebring convertible engine removal , 2002 chrysler sebring 6cylinder head removal , 2004 chrysler sebring convertible 2 7l how do you remove transmission , 98 CRYSLER SEBRING PULLING CODES , CHRYSLER ENGINE REMOVAL , Chrysler Sebring engine reomoval 2002 , how much is a frame for a 2007 Chrysler Sebring , remove engine on 02 chrysler sebring