2008 MODEL YEAR ESCAPE AND MARINER Vehicles Equipped With An Automatic Transmission — Transmission Fluid Cooler Inspection / Repair

…ough / harsh shifts. Dealers are to inspect the transmission fluid cooler for a grommet and possible fluid leak below the RH mounting bracket. Based on the results of the inspection, dealers will perform one of the following service actions: Inspection Result Grommet present Grommet not present and transmission fluid cooler not leaking Grommet not present and transmission fluid cooler leaking Service Action No further action required Install…

1995 Volvo 850 Automatic Transmission Removal and Installation

…engine about 1/4″ to relieve weight from engine mounts. Remove front wheels. Remove ABS sensor from left outboard shaft. DO NOT disconnect ABS electrical connector. Disconnect left and right brake lines and ABS cable brackets. Unhook brackets and allow them to hang free. Remove Torx screws and plastic nuts from left fender liner. Remove hub center nut locking clip. Remove hub center nut. Using a rubber or plastic mallet, knock in end of…

2010 Chevrolet Camaro TRANSMISSION Automatic Transmission TRANSMISSION CONTROL LEVER KNOB REPLACEMENT

Removal Procedure 1. Position the shift lever in PARK. 2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .3. Remove the bolt (1) from the shift control linkage rod. 4. Disconnect the shift control linkage rod from the shift control assembly.5. Remove the manual shift shaft nut (1). 6. Remove the …

Continue reading ‘2010 Chevrolet Camaro TRANSMISSION Automatic Transmission TRANSMISSION CONTROL LEVER KNOB REPLACEMENT’ »

2006-2010 Ford Focus Manual Transmission/Transaxle: Service and Repair Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.2. Remove the steering column shaft bolt. ^ To install, tighten to 28 Nm (21 ft. lbs.). 3. Remove the battery. For additional information, refer to Battery. Download