1997-2002 Ford Expedition Heater Core Replacement Instructions

…he dealer mechs were. The tool took a few minutes to figure out. Took a second trip back to the Ford dealer for replacement o-rings and clips. save time, buy these first cause you’ll break the originals, if you dont, change em anyway, your in this deep!! 2-A Another method without using the tool is just cutting off the inlet and outlet pipes from the heater core with a saws-all and pulling the hose/pipe out from the engine compartment side….

1992 Ford Taurus Heater Core Service and Repair

NOTE: Vehicles may be equipped with an aluminum or a copper brass heater core. Use replacement cores made of copper brass. Always identify the type of core being replaced because there is a difference in the heater core to heater case seals. Having the correct seal is essential to provide satisfactory heater system performance. Identification can be made by looking at one of the core tubes after a hose has been removed. An aluminum core will hav…

2004 Chevrolet Tahoe Heater Core Replacement (Visteon) Removal and Installation

Removal Procedure 1. Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement. 2. Remove the screws from the heater core cover.3. Remove the heater core cover (1) from the HVAC module assembly (2).4. Remove the heater core cowl gasket (1) from the heater core (2).5. Remove the heater core (1) from the HVAC module assembly (2). Download Related Entry: video replace tahoe heater core , 2004 chevy tahoe heater core hose diagram ,…

2007-2008 Ford Ranger Heater Core Removal and Installation

NOTE: If a heater core leak is suspected, the heater core must be leak tested before it is removed from the vehicle. For additional information, refer to Section 412-00. 1. Remove the instrument panel. For additional information, refer to Section 501-12. 2. Remove the evaporator core housing. For additional information, refer to Evaporator Core Housing in this section. 3. Drain the radiator. For additional information, refer to Section 303-03. 4…

2003 Ford Taurus Evaporator Core REMOVAL AND INSTALLATION

NOTE: The evaporator core is serviced as a core and housing assembly. The evaporator core, internal doors, seals and door linkage are included with the housing. Transfer the blower motor and wheel assembly, heater core and cover, dash panel seals and vacuum actuators to the new housing. All vehicles 1. Remove the heater core and evaporator core housing (19B555). For additional information, refer to Section 412-02. 2. Remove the heater-to-dash pa…