1996 Mitsubishi Eclipse GS-T Timing Belt & Balance Shaft Belt Removal and Installation

…Loosen tensioner pulley center bolt. Move tensioner to relieve timing belt tension. Remove timing belt. Remove timing belt auto tensioner. See Fig. 1 . 5. Remove plug from left side of cylinder block. Install a .31″ (8.0 mm) diameter Phillips screwdriver into the hole against balance shaft. See Fig. 4 . Screwdriver must go in at least 2.36″ (60 mm) or more. If screwdriver will only go in about .79-.98″ (20-25 mm) before strikin…

1996 Toyota Avalon XL 2.5L & 3.0L V6 – DOHC Timing Belt Service

…Using crankshaft pulley bolt, rotate crankshaft clockwise until timing mark on crankshaft sprocket aligns with timing mark on oil pump body. See Fig. 3 . Ensure timing marks on camshaft sprockets are aligned with timing mark on No. 3 timing belt cover. See Fig. 3 . If timing marks are not aligned, rotate crankshaft clockwise one full revolution (360 degrees). Download Related Entry: how to set camshaft gears on a 96toyato avalon v6 , 1996 toyo…

1992 Mitsubishi Eclipse Timing Belt Removal & Installation

…221; and flange. Remove timing belt tensioner “B”. If timing belt “B” is to be reused, mark direction of timing belt rotation for reassembly reference. Remove timing belt “B”. Download Related Entry: timing marks on a 1992 mitsubishi eclipse AWD , 08 tacoma taiming chei 4 0 , timming marks on toyota 2zr engine , sonata timing chain tensioner , replace chain belt of toyota rav4 2007 , hyundai 3 3 timing chain

1998 Mitsubishi Galant ES Timing Belt & Balance Shaft Belt Removal and Installation

…. If necessary, remove drive belt tensioner pulley bracket and power steering pump pulley. See Fig. 1 . Remove water pump pulley. 3. Remove crankshaft pulley. Noting bolt lengths and locations, remove upper and lower timing belt cover with gasket. CAUTION: DO NOT rotate crankshaft counterclockwise (as viewed from timing belt end of engine). If timing belt is to be reused, mark direction of rotation before removing. 4. Rotate crankshaft clockwise…

1996 Toyota Tacoma Timing Belt Removal And Installation

INSTALLATION 1. (a) INSTALL CRANKSHAFT TIMING PULLEY Align the pulley set key with the key groove of the timing pulley and slide on the timing pulley. Slide on the timing pulley, facing the flange side inward. (b) 2. (a) INSTALL NO. 1 IDLER PULLEY Using a 10 mm hexagon wrench, install the No. 1 idler pulley with the plate washer and bolt. Torque:35 N·m (350 kgf·cm, 26 ft·lbf) Check that the pulley bracket moves smoothly. INSTALL NO.2 IDLER PULLE…